Filter Maintenance | Airmega 250Updated 10 months ago

Pre-Filter Maintenance
The Airmega 250 pre-filter is easy to manage. When the indicator turns orange, it’s time to clean the pre-filter. Follow these steps:

1. Turn off the product.
2. Remove the pre-filter by lightly pulling the front cover and extracting the filter.
3. Clean the pre-filter by vacuuming or washing it with water.
4. Hang the pre-filter on the front cover for fast and convenient drying. Ensure it is completely dry before reinstalling.
5. Reinstall the dry, clean pre-filter back into the Airmega 250.
6. Press the front cover on both sides to seal it.
7. Press and hold the pre-filter indicator for 3 seconds to reset.

Max2 Filter Maintenance
The indicator turns orange when the Max2 filter needs to be replaced. Follow these steps:

1. Open the front cover of the Airmega 250 completely.
2. Remove the pre-filter, then remove the Max2 filter.
3. Ensure to remove the plastic packaging from the new Max2 filter before installation.
4. Install the new filter with the tag and black side facing you.
5. Replace the front cover.
6. Press and hold the Max2 indicator for 3 seconds to reset.