Safety Information

❗ Make sure the unit is turned off and disconnected from the power plug before cleaning.

❗ Do not use detergents that contain organic solvents (solvent, thinner, etc.), bleach, chlorine, or abrasives.

❗ Do not put the air purifier in water or spray water directly on it.

Cleaning the Air Quality Indicator [AQI] (every 2 months)

Use a soft brush or vacuum cleaner for the inlet and the air outlet of the air quality sensor.

1. Open the air quality sensor cover on the right-hand side of the unit.

2. Wipe the lens, and the dust inlet and outlet with a dry cotton swab.

Without regular cleaning, the performance of the air quality sensor deteriorates. The cleaning cycle differs depending on the pollution of the surroundings.

Cleaning the Air Inlet and Outlet

1. Clean the air inlet and outlet with a soft brush.

2. Exercise caution not to have dust fall inside the air purifier.

3. If cover in dust, run the air purifier in manual mode for 10 minutes to blow the dust off the vent.

4. You may then continue with normal use.

Cleaning Front Cover

1. Separate the front cover from the rest of the unit.

2. Use a soft cloth or brush to wife off the dust on the surface of the front cover.

3. Use a lightly wet cloth if the contamination is high but do not use abrasives.

Cleaning the Main Body of the Product

1. Use a dry and soft cloth to wife the body of the product.

2. Use a lightly wet cloth if the contamination is high but do not use abrasives.